Move-out cleaning price calculator

Price a move-in or move-out clean by bedrooms and bathrooms or by square footage. Adjust for the condition of the home, add the oven, fridge, cabinets or windows, and get a price that hits your target margin. Nothing leaves this page.

The home

Labor hours for the shared areas.
Multiplies the base hours. Add-on minutes are added after.

Add-ons (labor minutes)

min
min
min

Costs and goals

Employer taxes, workers’ comp and similar, as a % of wage. Use 0 if none apply.
The share of the price you keep — not a markup on cost.
The floor. No job goes out below this, however small.
Optional share of insurance, software, marketing. Leave 0 to see profit before overhead.

Suggested price

Recommended price

—

Your numbers in the formula

How the math works

Base hours = core hours + bedrooms × hrs per bedroom + bathrooms × hrs per bathroom (or sq ft ÷ move-out speed)
Labor hours = base hours × condition multiplier + add-on minutes ÷ 60
Job cost = labor (hours × wage × (1 + payroll)) + supplies + travel + overhead
Price = job cost ÷ (1 − target margin), then the minimum job price, then rounded up to the nearest $5

Base hours come either from rooms (core hours plus hours per bedroom and per bathroom) or from square footage divided by a move-out speed. The condition multiplier scales those base hours. Add-ons are added as minutes of labor, so an oven or a fridge is priced by the time it takes, at the same margin as everything else. Labor, supplies, travel and optional overhead make the job cost; the price is cost ÷ (1 − margin), floored by your minimum and rounded up to the nearest $5.

How to price a move-in or move-out clean

Move-outs are the jobs most likely to blow up a schedule. The home is empty, so every mark shows. Clients, landlords and property managers expect insides of cabinets, appliances and baseboards. And the condition is often unknown until you open the door. The fix is to price from hours and to be explicit about what you assumed.

  1. Get the room count or the square footage, plus the add-ons the client wants: oven, fridge, inside cabinets, windows.
  2. Ask about condition and request a few photos. Light, average, heavy and very heavy are starting multipliers — replace them with what your own jobs show.
  3. Estimate labor hours for the whole crew. Two cleaners for four hours is eight labor hours.
  4. Cost the job and price for margin. Move-outs use more product, so a higher supplies-per-hour rate than a standard clean is reasonable if that’s what you see.
  5. Write the assumption into the quote: “Price assumes average condition and an empty home.” It turns an awkward on-site argument into a simple re-quote.

Worked example — the default inputs, not a market rate

A 3-bedroom, 2-bathroom home in average condition: 2.5 core hours + 3 × 1.0 + 2 × 1.25 = 8 base hours. Inside oven (45 min) and fridge (30 min) add 1.25 hours, for 9.25 labor hours — about 4.6 hours on site for two cleaners.

Labor: 9.25 × $20 × 1.12 = $207.20. Supplies: 9.25 × $3 = $27.75. Travel: 20 × $0.70 = $14.00. Job cost: $248.95. At a 35% margin: $248.95 ÷ 0.65 = $383.00, rounded up to $385. Switch the condition to heavy and the same home prices at $480.

Rooms or square footage?

Room-based pricing is easier to quote on a call, and it handles homes where a big living area takes less time than several small bathrooms. Square-footage pricing is better when you’ve measured a move-out speed across many jobs. A useful check: run a job you’ve already completed through both methods and compare with the hours it really took. Adjust the hours per room or the speed until the calculator matches reality.

Add-ons, minimums and re-quotes

Price add-ons by minutes, not by a round number you heard somewhere. If an oven takes you 45 minutes including the racks, enter 45. The minimum job price protects small apartments: a studio move-out still needs a trip, a full kitchen and a bathroom. And if the home is clearly worse than described, stop and re-quote with a higher condition multiplier before you start.

For the general method behind these numbers, see How to price house cleaning services. For a standard or deep house clean, use the house cleaning price calculator.

Questions

How much more should a move-out clean cost than a standard clean?

It depends on how much longer it takes you. Move-outs usually include inside cabinets, appliances, baseboards and build-up a regular client wouldn’t have, so they often take noticeably longer than a standard clean of the same home — our house cleaning article uses roughly 1.8–2.0× as a starting multiplier. Measure your own jobs and adjust the room hours or speed.

Should I price move-outs by the room or by square footage?

Either works if the hours are realistic. Rooms are easier on the phone because clients know their bedroom and bathroom count; square footage is better when you have a measured move-out speed. Try both on a job you’ve already done and see which matches the hours it really took.

How do I price an oven, fridge or inside cabinets?

By time. Enter how many minutes each add-on takes you. The calculator turns those minutes into labor cost and prices them at the same margin as the rest of the job, so an add-on is never a loss leader.

What if the home is much dirtier than the client said?

Quote with a condition assumption and say so in writing: the price assumes average condition. If you arrive to heavy build-up, re-quote on site using the heavy or very heavy multiplier, or switch to hourly pricing.

Does the number of cleaners change the price?

Not directly. More cleaners finish faster, but the total labor hours — and so the labor cost — stay the same. Crew size changes the time on site, which you can see in the breakdown.

Keep a free spreadsheet copy

A one-tab Excel and Google Sheets file that prices a cleaning job with the same margin formula used on this page. Free on Gumroad.

Download the free spreadsheet

Want quotes, a price list and a P&L?

The full kit prices move-outs, deep and standard cleans with up to five add-ons, then builds a quote, a client price list, a 12-month P&L and break-even. One-time $17.

Get the kit — $17 What’s inside

Other free calculators

See all free calculators

Planning tool only, not tax, legal or accounting advice. Default numbers are examples, not market rates or industry benchmarks. Profit is before overhead unless you enter an overhead amount, and excludes costs you didn’t enter (card or platform fees, unpaid admin time).