Commercial cleaning price calculator

Price office and janitorial work from your own numbers: cleanable square footage, a production rate you measured, visits per week or month, labor, supplies and a target margin. Get a price per visit and a monthly contract price. Nothing leaves this page.

The building and the schedule

Only the area you actually clean.
Measured on this kind of scope.
Liners, paper, soap — only if you supply them.

Costs and goals

Employer taxes, workers’ comp and similar, as a % of wage. Use 0 if none apply.
Chemicals, pads, bags and wear on equipment.
The share of the price you keep — not a markup on cost.
The floor. No job goes out below this, however small.
Optional share of insurance, software, marketing. Leave 0 to see profit before overhead.

Suggested price

Price per visit

—

Monthly price

—

Your numbers in the formula

How the math works

Labor hours per visit = cleanable sq ft ÷ production rate
Labor = labor hours × wage × (1 + payroll extras)
Supplies = labor × supplies % + consumables per visit
Visit cost = labor + supplies + travel + overhead
Visit price = visit cost ÷ (1 − target margin), then the minimum visit price, then rounded up to the nearest $5
Monthly price = visit price × visits per month (weekly visits × 52 ÷ 12), rounded up to the nearest $5

The calculator starts from time, not from a per-square-foot rate. Labor hours per visit are the cleanable area divided by your production rate. Labor cost adds payroll extras to the wage. Supplies are a percentage of labor (plus consumables if you provide them), travel is round-trip miles times your cost per mile, and the visit price is the visit cost divided by one minus your target margin. A minimum visit price sets the floor, and the result is rounded up to the nearest $5. The monthly price is the visit price times visits per month, also rounded up to $5.

How to price commercial cleaning from your costs

Commercial bids go wrong in two places: the production rate and the scope. A per-square-foot number found online hides both. Two offices with the same floor area can need very different labor once you count restrooms, break rooms, glass and how heavily the space is used.

  1. Walk the building and write the scope. Trash, vacuum, dust, mop, restrooms and kitchen? Interior glass, high dusting, floor machines? The price only means something for the scope you wrote down.
  2. Measure a production rate. Time real visits. As a rough example, detailed, restroom-heavy scopes might run at a few hundred square feet per labor hour, while open, lightly used floors with a basic scope can run several times faster. Your number is the one you timed.
  3. Cost one visit. Labor with payroll extras, supplies, consumables you provide, and the drive. Evening differentials and parking belong here if you pay them.
  4. Price for margin, then set a floor. Divide the visit cost by (1 − margin). Small suites often fall below what a visit is worth to you, so the minimum visit price does the work.
  5. Convert to a monthly contract. Visit price × visits per month. Write the billing rule (4.33 weeks or flat 4) into the agreement.

Worked example — the default inputs, not a market rate

An 8,000 sq ft suite, cleaned three evenings a week, at a measured 800 sq ft per labor hour: 10 labor hours per visit, or two cleaners on site for five hours. Labor is 10 × $18 × 1.12 = $201.60. Supplies at 10% of labor are $20.16. Travel is 14 miles × $0.70 = $9.80. Visit cost: $231.56.

At a 30% target margin: $231.56 ÷ 0.70 = $330.80, rounded up to $335 per visit. Three visits a week is 13 visits a month (3 × 4.33), so the monthly price is $4,355. Change the production rate to 500 and the same suite costs far more to clean — and the price follows.

Small offices and the minimum visit price

A 1,000 sq ft office might need just over an hour of labor. The formula alone can return a price that doesn’t cover the drive, the alarm code, a full restroom and the slot in your evening. That’s why the calculator has a minimum visit price. Set it at the smallest amount that makes a visit worth leaving the house for, and let small accounts land on it. If a prospect won’t pay the floor, the account probably isn’t one to take.

First cleans, extras and scope creep

The first visit on a neglected building isn’t a regular visit. Quote it separately at a slower production rate or by the hour. Floor stripping, carpet extraction and window work are separate tickets with their own labor and supplies. When a client keeps adding “one more thing,” recost the visit here with the new scope rather than absorbing it for months.

For the full method, read How much to charge for commercial or office cleaning, and see how to calculate your profit margin once the month’s numbers are in.

Questions

How much should I charge per square foot for office cleaning?

There isn’t one honest per-square-foot number to copy. The price per square foot falls out of your production rate, wage, supplies, travel, visit frequency and margin. Use this calculator to get a visit price from your own costs, then divide by the square footage if a client asks for a per-square-foot figure.

What production rate should I use?

One you measured. Time a few real visits on the same scope (or a pilot clean), add up the labor hours for the whole crew, and divide the cleanable square footage by those hours. Restroom-heavy and detailed scopes are much slower than open, lightly used floors.

Why 4.33 visits per month for weekly service?

A year has 52 weeks, and 52 ÷ 12 ≈ 4.33. Multiplying the weekly visits by 4.33 bills an average month. Billing a flat 4 weeks quietly gives away roughly one visit per quarter on a weekly account.

Is a 30% margin the same as adding 30% to cost?

No. Cost + 30% keeps only about 23% of the price. To keep 30% of the price, divide cost by 0.70. This calculator always uses price = cost ÷ (1 − margin).

Should I offer a discount for more frequent visits?

Only if the visits really get faster. More frequent service can lower the labor per visit because the space stays cleaner — if so, raise your production rate for that account rather than cutting the margin.

Keep a free spreadsheet copy

A one-tab Excel and Google Sheets file that prices a cleaning job with the same margin formula used on this page. Free on Gumroad.

Download the free spreadsheet

Want quotes, a price list and a P&L?

The full kit has a commercial production rate, a commercial price table, an auto-filled quote, a 12-month P&L and break-even. One-time $17.

Get the kit — $17 What’s inside

Other free calculators

See all free calculators

Planning tool only, not tax, legal or accounting advice. Default numbers are examples, not market rates or industry benchmarks. Profit is before overhead unless you enter an overhead amount, and excludes costs you didn’t enter (card or platform fees, unpaid admin time).