How Much to Charge for Commercial or Office Cleaning
This article was written with the help of AI tools and reviewed by the Sheetcrumb team.
Owners asking “how much should I charge for office cleaning?” are often handed a per-square-foot number they found online and told to multiply. That shortcut is how janitorial jobs end up booked at a loss. Two 10,000 sq ft offices are not the same job. One is an open floor with a nightly trash-and-vacuum scope. The other has kitchens, restrooms used all day, and a client who expects interiors of microwaves and glass every visit.
The reliable way to set a commercial price is the same way you should set a house cleaning price: measure how long the work takes you, add up the real cost of the visit, then price for the margin you need. What changes is the production rate, the scope, and the fact that most office work is sold as a recurring contract, not a one-off Saturday deep clean.
This article walks through that method and includes a fully worked example. Every dollar and hour in the example is labeled as such. It is not a market rate, and it is not a suggestion of what offices in your city pay.
How commercial work differs from house cleaning
Houses are furnished, cluttered and unique. Offices, warehouses and small retail spaces are often emptier, more repetitive and cleaned after hours. That usually means a higher number of square feet per labor hour than a residential standard clean — but only if the scope is tighter. A “full service” office with detailed restrooms can slow you right back down.
A few other differences matter for pricing:
- Scope is everything. Trash, vacuum, dust, mop, restrooms and kitchen might be the whole job. Or the contract might include interiors of appliances, glass, high dusting, floor machines or consumables (soap, liners, paper). Price the scope you agreed to, not a generic office.
- Frequency is the product. Nightly, three times a week, weekly: each visit has a cost, and the monthly invoice is usually visits × the visit price (sometimes with a small package discount). More frequent service often goes faster per visit because the space never has time to get truly dirty — but you still have a trip, a setup and a minimum amount of work every time you walk in.
- After-hours access can mean evening or weekend wages, alarm codes, parking and a narrower window to finish. If those cost you more, they belong in the job cost or in a higher minimum.
- Supplies and consumables may be yours or the client’s. If you provide paper, soap and liners, that’s a real line, not a courtesy.
Step 1: Measure a commercial production rate
Don’t reuse your house-cleaning speed. Time real commercial jobs (or a thorough walkthrough plus a pilot clean) and calculate:
Use the area you actually clean, not the entire building if you’re only doing a suite. If two cleaners work four hours, that’s eight labor hours. Average several visits before you trust the number. New buildings, heavy restroom use and first-time “reset” cleans will come in slower than a settled nightly account.
There is no single correct production rate to copy from a forum. If someone quotes a number that wasn’t measured in a building like yours, with a scope like yours, it isn’t your number.
Step 2: Build the cost of one visit
For each visit, add:
- Labor — labor hours × wage × (1 + payroll extras). Use the wage that applies to the shift, including any evening differential you actually pay. If you clean the office yourself, still include a wage. Otherwise the contract is paying you nothing for those hours.
- Supplies — a per-labor-hour rate, plus any job-specific chemicals or tools, plus consumables if you provide them.
- Travel — round-trip miles × your cost per mile. A contract you have to visit five nights a week makes mileage a serious monthly number.
That’s the direct cost of the visit. Overhead (insurance, software, bonding, marketing, unpaid admin) is not in this list yet. You can add a share of overhead to each visit, or you can keep it out and use a target margin high enough to leave something for those costs. Either way, don’t pretend overhead is zero.
Step 3: Price the visit, then the month
To hit a target margin on the costs you entered:
Then apply a minimum visit price if the office is small, and round up to a clean number. For a recurring contract:
4.33 is the average number of weeks in a month (52 ÷ 12). Some companies bill a fixed four weeks and accept the slight under-billing in longer months; others use 4.33 so a three-times-a-week account isn’t quietly shorted. Be consistent, and write the rule into the agreement.
Adding 30% on top of cost is not a 30% margin. A $231 cost plus 30% is $300, which keeps only 23%. To keep 30% of the price, you divide by 0.70. The house cleaning pricing article shows this markup-versus-margin trap in more detail — the arithmetic is identical here.
Worked example — illustration only, not a market rate
Suppose you have an 8,000 sq ft office suite, cleaned three evenings a week. After timing similar work, your commercial speed on this scope is 800 sq ft per labor hour. That’s 10 labor hours per visit, or two cleaners on site for five hours.
- Labor: 10 hrs × $18/hr × 1.12 payroll extras = $201.60
- Supplies: 10 hrs × $2.00 = $20.00
- Travel: 14 miles × $0.70 = $9.80
- Visit cost = $231.40
Target margin on those costs, in this example: 30%. Visit price = $231.40 ÷ 0.70 = $330.57, rounded up to $335 per visit.
Monthly, using 4.33 weeks: 3 × 4.33 ≈ 13 visits × $335 = $4,355 per month (you might quote $4,350 or $4,400). Profit on the costs entered would be $335 − $231.40 = $103.60 per visit, about 31% after rounding — before overhead you didn’t put in the cost.
Change any input and the price should change. A 15-mile longer drive, a restroom-heavy scope that drops speed to 500 sq ft per hour, or a wage of $22 would all produce a different number. That’s the point of costing the job instead of copying a rate.
Run your own numbers
The free calculator can price a commercial-style visit the same way: use hourly mode and enter the crew’s labor hours, or use square footage with the speed you actually measured. It won’t build a monthly contract or a price list — that’s in the full kit — but it will stop you quoting from a guess.
Open the free calculatorSmall offices and the minimum visit price
For a 1,200 sq ft professional office, the formula may spit out a visit price that doesn’t cover the drive, the alarm, the restroom clean and the calendar slot. A minimum visit price is how you stay in business on small accounts. If the client only wants weekly service and the minimum makes the monthly total look high for the square footage, you can explain it plainly: each visit has a floor, because you still have to get there and do a complete restroom and kitchen, not a tiny fraction of a large building.
If you can’t defend the minimum, you probably shouldn’t take the account. A cheap small office that sits 25 minutes away will crowd out better work.
First cleans, specials and extras
The first visit on a neglected building is not a regular visit. Treat it like a house deep clean or a move-out: a higher time multiplier, or a one-time hourly clean until the space is under control. Floor stripping, post-construction work, appliance interiors and window work belong as add-ons or separate tickets, with their own labor and supply cost.
If the client later asks for “just one more thing” every week, that’s a scope change. Recost the visit or add a line, rather than absorbing it for six months and wondering why the account feels unprofitable.
Putting a number on a proposal
A clean commercial proposal states the scope, the frequency, what’s excluded, the visit or monthly price, the start date, and how the work can be adjusted. You don’t have to show the client your cost breakdown. You do have to have one, so a negotiation doesn’t talk you below cost. If a prospect already has a budget, compare it to your cost. A bid below job cost plus a serious contribution to overhead isn’t a foot in the door.
Quick recap
- Measure a commercial production rate on your scope, not a residential one and not a number from the internet.
- Cost each visit: labor (with payroll extras), supplies or consumables, and travel.
- Visit price = cost ÷ (1 − target margin), then apply a minimum and round up.
- Monthly price = visit price × visits per week × 4.33 (or another rule you apply consistently).
- First cleans and extras get their own price.
- Small offices are often won or lost on the minimum visit price, not on a per-square-foot average.
Price commercial jobs in the same workbook as your houses
The Cleaning Business Pricing & Profit Kit can price by square footage or by the hour and has a commercial production rate of its own, plus a commercial price table, a quote, a monthly P&L and break-even. One-time purchase, $17.
Disclosure: Sheetcrumb makes and sells this kit. Numbers in this article are illustrative examples, not industry benchmarks or going rates in any city, and this isn’t tax, legal or accounting advice. Job profit calculated from the costs you enter is before overhead unless you include overhead in the cost.